Independent product guide

MOOKEERF Coax Cables, Connectors & Power Wire

From PL-259 jumpers and KMR400 feed lines to solar-to-XT60i cables and THHN building wire: the whole MOOKEERF range on amazon.com, sorted into ten categories.

Browse categories
MOOKEERF RG213 PL-259 to PL-259 Coax Cable
  • 16,663ratings on Amazon
  • 142products
  • 121product lines
  • 10categories

MOOKEERF Coax Cables, Connectors & Power Wire

MOOKEERF is a cable brand sold on Amazon by the seller mookee. Its catalogue is built around RF coaxial cable: 50-ohm RG58, RG8X, RG213, RG316, KMR240 and KMR400 jumpers with PL-259, N, SMA, BNC and TNC ends for CB, ham, Wi-Fi, LoRa and cellular gear, 75-ohm RG6 and RG11 for satellite and TV, plus the crimp connectors and adapters to build or adapt your own runs.

Alongside the coax, MOOKEERF makes power cables for portable power stations and off-grid setups (solar extension cables, solar-to-XT60, XT60i, SAE, Anderson-style and DC 8 mm leads), red-and-black battery and welding cable, THHN, NM-B, MC and mini-split wire, shielded plenum and CNC cable, Starlink Gen 3 replacement cables and antenna mast hardware. This guide lists every line we found in stock, with the real length and gauge options of each.

Copper conductors

Battery, welding, THHN, mini-split and solar cables use oxygen-free or tinned copper; RF lines use copper centre conductors with foil-and-braid shields.

50 Ω and 75 Ω coax

RG58, RG8X, RG213, RG316, KMR240 and KMR400 for radio and wireless gear, plus RG6 and RG11 for satellite, TV and broadband.

Factory-fitted ends

PL-259, N, SMA, BNC, TNC, F-type, XT60, XT60i, SAE, Anderson-style and DC 8 mm connectors come pre-attached and heat-shrunk.

Short jumpers to long runs

Most lines come in many lengths, from 1 ft patch jumpers to 100 ft and longer feeder runs and bulk spools.

What the listings show

Low-loss coax for radio work — MOOKEERF

Low-loss coax for radio work

The KMR400 PL-259 line is specified at under 2.8 dB of loss over 50 ft at 450 MHz with an SWR of 1.25 or less, and every PL-259 end is sealed with a long adhesive heat-shrink sleeve so the connector does not pull off the cable.

CB & Ham Radio Coax →
Solar cables for portable power stations — MOOKEERF

Solar cables for portable power stations

Solar-to-XT60i, XT60, SAE, Anderson-style and DC 8 mm cables use 10 AWG or 12 AWG tinned copper with PVC jackets rated to 105 °C, so a panel can sit far from the power station without heavy losses.

Solar & Power Station Cables →
RG6 for satellite and broadband — MOOKEERF

RG6 for satellite and broadband

The RG6 line uses an 18 AWG pure copper core with a dual shield (60 % braid plus 100 % foil), nickel-plated F connectors and rubber weather boots, rated from 2.3 MHz to 3 GHz.

RG6 & RG11 TV / Satellite Coax →
Battery and inverter cable — MOOKEERF

Battery and inverter cable

Red-and-black battery and welding cable from 8 AWG to 4/0 uses fine-stranded oxygen-free copper rated 600 V and -40 °C to 105 °C, and the solar battery cables add ring terminals and a flame-retardant sleeve for the run between battery bank, charge controller and inverter.

Battery, Welding & DC Wire →

What buyers say

Verified purchase reviews from amazon.com, shortened. Ratings and wording belong to the reviewers.

★★★★★

Connect Me Up

I used this to connect an antenna switch to my ham radio, and it works just fine. The PL-259s fit well and this was just the right length.
Edward A. ClevelandRG58 PL-259 to PL-259 Coax Cable
★★★★★

Good alternative

Good alternative for expensive LMR-400, I use it for POTA and roll it on a cable reel to avoid kinking.
OdiKMR400 PL-259 to PL-259 Coax Cable
★★★★★

Works perfectly with a 450W solar panel and EcoFlow!

I bought it to connect a 450W solar panel to an EcoFlow power station, and it works wonderfully. The cable is high quality, the connectors fit securely, and it handles the power transmission smoothly.
Leyi10 AWG Solar Connector to XT60i Cable
★★★★★

Good Quality BNC Cables

The connectors fit securely, the cable feels well made, and they work perfectly with my amateur radio and test equipment. Having two cables in the package is convenient.
Joe KRG58 BNC Male to Male Coax Cable
★★★★★

Is there anything more boring than making jumper cables for your radios?

These 3' RG-8X jumper cables are perfect. Well soldered and are even heat shrink tube wrapped at least 2" for a solid connection on both sides.
JodymanRG8X PL-259 to PL-259 Jumper Cable
★★★★★

Exactly what I needed

This is the exact length I needed to complete the connection between my solar panels and my generator. It's been a year since they've been connected and no issues whatsoever even in Orlando Florida climate!
R. Nicholas Martin10 AWG Solar Connector to XT60 Cable
★★★★★

Good quality carries strong signal even at length

I use this for connecting sat dish to tv. Works great, I don't see any degradation.
Wild BillRG6 F-Type Male to Male Coax Cable, Direct Burial
★★★★★

Highly Recommended

Great quality cable, I get full expected speeds out of my Starlink. It's compatible with my gen 3 kit and fits great in the socket. No connection issues yet.
Dominic JStarlink Gen 3 Replacement Cable

Frequently asked questions

Radio and wireless equipment (CB, ham, Wi-Fi, LoRa, cellular boosters, GPS, test gear) is 50 Ω, so use RG58, RG8X, RG213, RG316, KMR240 or KMR400. TV antennas, satellite dishes and cable modems are 75 Ω and need RG6 or RG11 with F connectors.

For short jumpers in a vehicle or between radio and meter, RG58 or RG8X is fine. For longer runs to a base antenna, choose the thicker RG213 or KMR400: the MOOKEERF KMR400 listing quotes under 2.8 dB of loss over 50 ft at 450 MHz.

Both are UHF connectors. PL-259 is the male plug with a threaded coupling nut, found on the ends of most CB and ham cables; SO-239 is the female socket found on radios, meters and antenna bases. A PL-259 to PL-259 cable joins two SO-239 sockets.

Check the solar input on the power station. Newer EcoFlow units use XT60i (which also accepts XT60), many Jackery and Bluetti units use DC 8 mm (DC7909), some use Anderson-style inputs, and RV and battery chargers often use SAE. Pick the MOOKEERF cable that has a solar connector on one end and your input on the other.

A lower AWG number means a thicker conductor that loses less power over distance. Most MOOKEERF solar leads are 10 AWG; battery cables go from 8 AWG down to 4/0 AWG for high-current inverters and winches. Longer runs and higher currents need thicker wire.

Yes. Crimp connectors are fitted with a coax crimp tool that has the right hex die for the ferrule, and a stripper set to the strip lengths for your cable. Each connector bag contains the body, centre pin, ferrule and heat-shrink.

The MOOKEERF RG6 with F connectors is sold as direct-burial cable with a UV-resistant PVC jacket and rubber weather boots on the connectors, so it can run outside to a dish or antenna.

THHN is a single insulated conductor that is pulled through conduit. NM-B is a sheathed indoor cable with several conductors and a ground for dry residential wiring. MC cable has the conductors and ground inside an aluminium armour. Local electrical codes decide which one may be used where.

The MOOKEERF Starlink cable is made for the rectangular Starlink Gen 3 (Standard V3) kit. It is not meant for older round or Gen 2 dishes, which use different plugs.

MOOKEERF sells on Amazon. Every “Details” button and option chip on this site opens the matching Amazon listing for your market, where current price, stock and delivery are shown. This site is an independent guide and does not sell anything itself.